Hikvision s Super Embedded NVR Designed for Professional Security Needs

Product Key Features General l Connectable to network cameras, network dome and encoders; l Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or PSIA protocol; l Connectable to the smart IP cameras. l PAL/ NTSC adaptive video inputs; l Each channel supports dual-stream; l Up to 256 network cameras can be connected; l Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.; l The quality of the input and output record is configurable; l A redundant power supply is provided to improve the system stability. Local Monitoring l Simultaneous HDMI1/ VGA/ LCD output as the main output and the HDMI2 works as the auxiliary output. l All video outputs at up to 1920× 1080 resolution. l 16-window division display for the HDMITM 1& 2, VGA interfaces and LCD screen, and 4-window division for HDMITM 3-6 interfaces. The display sequence of channels is adjustable. l Live view screen can be switched in group, and manual switch and automatic cycle live view are also provided, and the interval of automatic cycle can be adjusted. l Quick setting menu is provided for live view. l Motion detection, video tampering, video exception alert and video loss alert functions. l Privacy mask. l Multiple PTZ protocols supported; PTZ preset, patrol and pattern. l Zooming in by clicking the mouse and PTZ tracing by dragging mouse. HDD Management l Up to 24 SATA hard disks and 1 eSATA disk can be connected. ( Each disk with a maximum of 4TB storage capacity.) l 8 network disks ( 8 NAS disks, or 7 NAS disks+ 1 IP SAN disk) can be connected. l The SAS expansion enclosure can be connected for the expanded storage via the miniSAS interface. l Support eSATA disks for recording or backup. l Support S.M.A.R.T. and bad sector detection. ( Not supported when the RAID function is enabled.) l HDD group management. l Support HDD standby function. l HDD property: redundancy, read-only, read/ write ( R/ W) . l HDD quota management; different capacity can be assigned to different channel. l Support RAID0, RAID1, RAID5 and RAID10 storage scheme, and can be enabled and disabled on your demand. Recording and Playback l Holiday recording schedule configuration. l Continuous and event video recording parameters. l Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm. l 8 recording time periods with separated recording types. l Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule and manual recording. l Searching record files by events ( alarm input/ motion detection) . l Tag adding for record files, searching and playing back by tags. l Locking and unlocking record files. l Local redundant recording. l Provide new playback interface with easy and flexible operation. l Searching and playing back record files by channel number, recording type, start time, end time, etc. l Smart search for the selected area in the video. l Zooming in when playback. l Reverse playback of multi-channel. l Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback, and locating by dragging the mouse. l Up to 16-ch synchronous playback at 4CIF real time. Backup l Export video data by USB, SATA or eSATA device. l Export video clips when playback. l Management and maintenance of backup devices. l Either Normal or Hot Spare working mode is configurable to constitute an N+ 1 hot spare system. Alarm and Exception l Configurable arming time of alarm input/ output. l Alarm for video loss, motion detection, video tampering, abnormal signal, video input/ output standard mismatch, illegal login, network disconnected, IP confliction, record exception, HDD error, and HDD full, hot spare exception, etc. l Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and alarm output. l Automatic restore when system is abnormal. Other Local Functions l Operable by front panel, mouse, control keyboard and touch LCD screen ( depends on the model) . l Three-level user management; admin user is allowed to create many operating accounts and define their operating permission, which includes the limit to access any channel. l Operation, alarm, exceptions and log recording and searching. l Manually triggering and clearing alarms. l Import and export of device configuration information. Network Functions l 4 self-adaptive 10M/ 100M/ 1000M network interfaces, and various working modes are configurable: multi-address, network fault tolerance, etc. l 4 1000M optical fiber interfaces. l IPv6 is supported. l TCP/ IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported. l TCP, UDP and RTP for unicast. l Auto/ Manual port mapping by UPnPTM. l Remote web browser access by HTTPS ensures high security. l Remote reverse playback via RTSP. l Support accessing by the platform via ONVIF. Remote search, playback, download, locking and unlocking of the record files, and support downloading files breakpoint resume. l Remote parameters setup; remote import/ export of device parameters. l Remote viewing of the device status, system logs and alarm status. l Remote keyboard operation. l Remote locking and unlocking of control panel and mouse. l Remote HDD formatting and program upgrading. l Remote system restart and shutdown. l RS-232, RS-485 transparent channel transmission. l Alarm and exception information can be sent to the remote host l Remotely start/ stop recording. l Remotely start/ stop alarm output. l Remote PTZ control. l Remote JPEG capture. l Two-way audio and voice broadcasting. l Embedded WEB server. Development Scalability: l SDK for Windows and Linux system. l Source code of application software for demo. l Development support and training for application system.